|
TRANSFER/SHADERS |
 |
Razertip
#F73.07
- Transfer/Shader 7mm
Polished steel blade is great for
general shading. It glides smoothly over the wood. The edge can
be used for lines. Also excellent for heat transfer of photocopied
patterns onto almost any surface such as wood, gourds, paper, etc. The
pen can be swept sideways and will not drag on the wood as many traditional
shaders can. Inverted tip can be used for stippling and for calligraphy.
Retail Price: $27.50
Our Price: $23.95
|
|
 |
Razertip
#F73.10
- Transfer/Shader 10mm
The 10mm Transfer/shader with
larger blade is best suited for transfer work, but can also be used to shade
(takes a bit longer to heat than the 7mm tip).
Retail Price: $27.50
Our Price: $23.95
|
|
|
LONG PENS |
|
 |
Razertip
#HD1S-L -
small long skew
The long version of
the #1S tip is available only in heavy-duty. Used for cutting and
detailing gourds and for cutting plastic. This is used and
demonstrated in the book, "Complete Book of Gourd Carving".
Retail Price: $31.50
Our Price: $27.25
|
|
|
TIP SETS |
 |
Razertip
#SET5BC
- BIRD CARVER'S MICRO TIP SET
The set contains 5 of our
smallest tips (1S, 2S, 5S, 6S, 7S). Use with the BPH interchangeable-tip
pen.
Retail Price: $18.00
Our Price: $15.85
|
|
 |
Razertip
#SET8
- BIRD CARVER'S TIP SET
The set contains 8 of our
most popular bird-carvers tips (1S, 2M, 4M, 5M, 6M, 7L, 8 & 9). Use with the BPH interchangeable-tip
pen.
Retail Price: $26.75
Our Price: $23.55
|
|
|
CALLIGRAPHY |
 |
Razertip
#F6SB
- CALLIGRAPHY, SMALL
Designed
primarily for calligraphy, the edge is more bullet-nosed than knife-sharp so
it's less likely to dig into the wood than the larger #6 tips.
Retail Price: $27.50
Our Price: $23.95
|
|
 |
Razertip
#F68M
- BRASS MEDIUM CALLIGRAPHY
This smooth chisel-type
calligraphy tip is for heavier writing. Approx 3/16" wide, it is less
prone to "digging" than the #6 Calligraphy tips. Also leaves a heavier
line than the #6 tips. These new calligraphy tips also hold their heat
more consistently than the #6 tips, which make them very useful as shaders.
Retail Price: $27.50
Our Price: $23.95
|
|
 |
Razertip
#F68L
- BRASS LARGE CALLIGRAPHY
A larger version of the
#RT-F68M
Retail Price: $27.50
Our Price: $23.95
|
|
|
BALL STYLUS PENS
These have become our most
popular pen because of their versatility.
All purpose writing tip for
general purpose work. Straight lines, curves, tight curves, circles,
writing, shading and pointillism (stippling). These tips retain heat well
for consistent burning. Unlike the #9 writing tips, these ball stylus
pens glide across the wood without grabbing it making it even better for
writing and flowing lines.
Be sure to use an HD cord for
the larger sized ball tips (.023 and larger).
Extra caution needs to
be taken when using these tips, they stay hotter longer after they are
unplugged. The larger sizes can stay hot for up to 5 minutes so please be
extra cautious when using them. The larger sizes of
the #99 series tips require a longer warm-up time and cool-down time than
our other tips. Yes, the price is different than the other tips, it's
not a mistake.
|
|
Shown with .5 mm lead pencil & fine ball point pen
|
Razertip
#F99.008 - Ball stylus .8
mm
Razertip
worked with me to develop these pens and they have been adding more sizes
as the need has developed. On these smaller versions the
polished ball is fused onto the tip. These are the smallest ball tips available! The smaller ball stylus' are great
for cursive writing, lines, burning on tagua nuts and other miniatures and a multitude of other uses. It glides over the
wood to making writing with this tool a snap. Because of it's small size, it
is soldered to the tip rather than having a wire through it.
Retail Price: $27.50
Our Price: $23.95
|
|
Shown with .5 mm lead pencil & fine ball point pen |
Razertip
#F99.012 - Ball stylus 1.2
mm
Retail Price: $27.50
Our Price: $23.95
|
|
|
Shown with medium ball point pen |
Razertip
#F99.015 - Ball stylus 1.5
mm
1/16" solid polished ball.
Retail Price: $27.50
Our Price: $23.95
|
|
 |
Razertip
#F99.023 - Ball stylus 2.3
mm
3/32" solid
polished ball.
This ball
tip, developed by Razertip is nickel-plated and rather than being soldered
on the tip, which can easily break, it is attached with wire going through
the ball to ensure it is secure. It is wonderful for shading,
writing, lines, and so many other things...just experiment.
They
don't lose their heat and burn
smooth.
Retail Price: $27.50
Our Price: $23.95
|
|
 |
Razertip
#F99.030 - Ball stylus 3.0
mm
1/8" solid polished ball
Retail Price: $27.50
Our Price: $23.95
|
|
 |
Razertip
#F99.055 - Ball stylus 5.5
mm
1/4" solid polished ball
Retail Price: $27.50
Our Price: $23.95
|
|
|
MISCELLANEOUS SPECIAL USE
PENS |
 |
Razertip
#F9G.17 -
gourd cutter
Tempered tip is
great for piercing/cutting gourds. Use at fairly high heat with a
"sawing" action. Very popular with gourd artists.
Retail Price: $27.50
Our Price: $23.95
|
|
 |
Razertip
#F35S
- Keith Mueller Split Maker
Designed by world-champion
Keith Mueller for putting tiny, subtle splits into feathers. Exclusive
to Razertip®
Retail Price: $31.50
Our Price: $27.25
|
|
