|
ITEM |
DESCRIPTION
|
ORDER |
Shown in Cherry & Maple
 |
WOODBURNING PEN
Holder
9" x 4"
x 5" Tall
This Woodburning
Pen holder will keep all your pens neatly organized and convenient while you are
working. It holds
10 pens and most brands of woodburning pens
(except the solid point burners). It has just been redesigned
to accommodate the new
Razertip heavy duty pens.
It is made from
solid woods such as birch, cherry, mahogany, maple, etc (except for the bottom piece
covering the holes) and comes with a protective varnish finish.
This holder was designed by Nedra and Alan (who is the one who makes them).
For safety this holder
is
intended to be used with the pens in their plastic tubes.
PRICE: $26.95
|
|
 |
WD400 HONE STROP
These stops are
unique because of the special rubber-like material used on the strop.
This material eliminates the inconsistencies of leather and will greatly
outlast leather strops. The strop surface can be renewed periodically
with a little detergent and water. Each strop is bound to a wooden
handle and has a round edge. These are great for honing carving tools
and woodburning tips. This is what Nedra uses to clean her Razertip pens
along with #WD402 Aluminum oxide powder.
PRICE: $12.95
|
|
 |
WD402 ALUMINUM OXIDE POLISHING
COMPOUND
This strop abrasive is
pure aluminum oxide powder without any wax binders. It comes in a one
ounce jar and will go a long way. Just a pinch of the abrasive powder
on your strop will maintain your carving tools and woodburning tips.
PRICE: $4.95
|
|
|
Pyrography Table
in your choice of finished
or unfinished so you can woodburn your own
original design on your table!
 |
Portable Pyrography Table
13.5" x 13.5"
UNFINISHED
We have been making our
pyrography tables for many years and they have been very popular. The tables are designed to
be lightweight, portable and used on top of a solid surfaced table top for
proper support. It is designed to provide optimal comfort and the
proper angle for your hand to avoid stress and strain as well as keeping the
burning pens cooler. It is not intended for use on a lap.
Our redesigned tables are a
bit larger and now come finished or unfinished so you can woodburn your own
designs on them.
The tables are made out of cabinet grade maple or birch plywood so that
you can woodburn your own design on them safely.
PRICE: $26.00
|
|
|
Portable Pyrography Table
FINISHED
The same as above but with a
varnish finish
PRICE: $28.00
|
|
 |
SARAL TRANSFER PAPER -
GRAPHITE
12-1/2 inches x 12 ft.
Roll - Graphite
TRANSFER PAPER does not contain wax and is great for transferring patterns to
light colored raw wood for chip carving, woodburning, etc. Lines can easily be erased when you are finished and it can be
used over and over again. For more information about Saral
click here!
PRICE: $11.95
|
|
|
|
TRANSFER PAPER - GRAPHITE
5 sheet (8-1/2" x
11") pack - Graphite
TRANSFER PAPER does not contain wax and is great for transferring patterns to
light colored raw wood for chip carving, woodburning, etc. Lines can easily be erased when you are finished and it can be
used over and over again. For more information about Saral
PRICE: $4.00
INCLUDES SHIPPING
|
|
 |
TRANSFER PAPER - WHITE
5 sheet (8-1/2" x
11") pack - White
Same as above
except white transfer paper...good for transferring patterns onto painted
and/or dark surfaces.
PRICE: $4.00
INCLUDES SHIPPING
|
|
 |
Riffler HEAVY-DUTY RASP FILE SET -
8
piece set
6mm x 200mm
DUE 9/29/08
Use these before you use the
file set.
Pouch packed, each file 8'' total length.
Price: $7.95 |
|
 |
Riffler Files - 10 piece set
3mm x 180mm
DUE 9/29/08
Originally
designed for woodworkers, rifflers are great for rapid smoothing of carved
areas! The curved ends fit into tight corners, and each file has a
different shape. Coarser than sandpaper, these will remove material
quickly, and leave a smooth finish.
Good for minimizing rough
areas of the cut openings of your gourd. They help create a beveled
shaping of the gourd cut openings and gourd jewelry pieces. Use these
files after the use of a rasp to smooth and clean your finish. Do not use
on the surface of your gourd, only on the cut and carved areas.
Pouch packed, each file 6 1/4'' total
length. 10 unique styles.
Price: $7.50 |
|
| photo not
available yet |
Riffler NEEDLE FILE SET - 10
piece set
3mm x 140mm
DUE 9/29/08
Same as above but for smaller
hands
Price: $8.10 |
|
| photo not
available yet |
NEEDLE FILE SET - 10 piece set
3mm x 140mm
DUE 9/29/08
Pouch packed, 6 1/4'' length files.
Round, flat, and triangular styles. Great for filing the top of gourds where
stem was.
Price: $8.40 |
|
 |
MICRO SANDING STICK - 320 GRIT
DUE 9/30/08
This is a must have tool for
sanding the finest areas and the smallest detailed area. Perfect for
removing leafing where it is not wanted, especially right up to the detailed
line of where it is applied. This tool is intended for detail cleaning of
excess product such as inks, paints and other products.
A
perfect complement to Riffler files, this sanding stick is wonderful for
getting into tight areas that can't be smoothed with normal sandpaper,
especially flat background areas and tight corners. Use this tool to do your
final smoothing after carving. The spring loaded design maintains belt
tension, and allows you to rotate the abrasive belt 360 degrees for complete
and economical to use.
See the refills packages
for other grits available for this tool. It is so easy to change, just push
down on a spring like action and change the belt.
RETAIL PRICE: $6.59
OUR PRICE: $6.00 |
|
 |
MICRO SANDING WAND REPLACEMENT
BELTS - 240 GRIT
DUE 9/30/08
This set of 5 belts are
replacement belts for the sanding stick.
RETAIL PRICE: $8.85
OUR PRICE: $8.00 |
|
|
MICRO SANDING WAND REPLACEMENT
BELTS - 320 GRIT
DUE 9/30/08
This set of 5 belts are
replacement belts for the sanding stick.
RETAIL PRICE: $8.85
OUR PRICE: $8.00 |
|
|
MICRO SANDING WAND REPLACEMENT
BELTS - 400 GRIT
DUE 9/30/08
This set of 5 belts are
replacement belts for the sanding stick.
RETAIL PRICE: $8.85
OUR PRICE: $8.00 |
|
 |
SANDING PADS
These sanding pads are
280 grit on one side and 400 on the other. They are 2 x 23/4
and perfect for fitting in your tool box to take to classes and shows.
Price: $1.30
EACH
|
|
|
SANDING PADS - 10
Pack
Stock up and Save!
Order in multiples of
10 and save $1.00 on each pack.
Price: $12.00/10
pack
|
|
 |
Brass Brush
DUE 9/30/08
Great for cleaning burs and solid point woodburning tips
(such as Wall Lenk and Walnut Hollow).
Put your dirty or clogged burs in a small jar with a bit of acetone or other
solvent and soak them for a while. Clean off any remaining residue by
brushing the burs with this brass brush - it cleans great but isn't too
harsh on the burs.
PRICE: $.85 |
|
 |
K-5 KNIFE w/HEAVY-DUTY PLASTIC
HANDLE
DUE 9/30/08
With 7/16" aluminum adapter, 4
jaw machined aluminum chuck for secure blade positioning and a Snug fitting
plastic Safety Cap for your protection. Includes #20018 multipurpose blade
that can be used to pierce the gourd shell and for general cutting and
trimming. Also good
for precision cutting, trimming, stripping paper, plastic and wood.
Can be used with all blades listed here. Comes with Safety tube
RETAIL PRICE: $4.09
OUR PRICE: $3.75 |
|
 |
B-15 NARROW SAW BLADE - CARDED
W/TUBE
Size: 2 1/2" x 3/8" x2"
DUE 9/30/08
Medium duty blade for more
intricate cutting, the width of this blade makes it easier to manipulate in
narrow areas. For
gourds, wood, plastic, rubber, foam and vinyl.
Comes 5 per card with safety
tube.
RETAIL PRICE: $5.11
OUR PRICE: $4.15 |
|
|
photo not available yet |
B-27 Fine Saw Blade - Carded
Size: 3/1 x 3/8" x 2 1/2" Edge
DUE 9/30/08
Medium duty blade for general
carving. A good all-purpose blade that saws through the gourd shell
with ease. For
gourds, wood, plastic, rubber, foam and vinyl.
Comes 5 per card.
RETAIL PRICE: $5.70
OUR PRICE: $4.20 |
|
|
photo not available yet |
B-28 Concave Carving Blade
- Card w/TUBE
Size: 1" x 3/8" x 1 3/4" Edge
DUE 9/30/08
Medium Duty blade for carving
and shaving, this blade is perfect for trimming and rounding the cut edge of
the gourd. For gourds,
wood, plastic, rubber, foam and vinyl.
Comes 5 per card with safety
tube.
RETAIL PRICE: $3.42
OUR PRICE: $2.75 |
|
 |
X-ACTO STANDARD WOODCARVING SET
COMING SOON!
Very versatile kit contains
everything you need to carve. Contains 6 assorted blades, 5 assorted
gouges, 4 assorted routers and one K5 Handle.
Set contains: #5 Knife handle for precision
cutting of heavy weight materials; #18, #19, #22, #24, #26, #15, U Carving
Gouge, Wide U Carving Gouge, Wide Carving V Gouge, Narrow Carving V Gouge,
Wide Carving Chisel Gouge and Narrow Carving Chisel Gouge blades
Price: $27.99 |
|
 |
AWL
Invaluable
tool is excellent for piercing holes in gourds and leather. Sharp 2-1/2"
blade, hardwood handle, brass ferrule. Also used to mark patterns. This awl
has a wonderful handle that is comfortable to use
Price: $3.99 |
|
 |
ALUMINUM HANDLE NEEDLE AWL
6" x 5/6" x 1/32"
COMING SOON!
Invaluable
tool is excellent for piercing holes in gourds, paper and leather.
Price: $3.99 |
|
| |
|
|
